Thermodynamic Steam Traps
Product Overview
Manufactured by CLAM Engineering; in Bronze, Carbon Steel and Chrome Moly Steel, to the original specifications; complete with the full spare parts back up.
Trap Selection
The unique design enables a replaceable valve and seat selection within the body of each model, and a range of valves and seats universally interchangeable in the bodies of all MK7 series traps.
MK2 steam trap with integral strainer
Pressure limit
35-1720 Kpa.
Temperature limit
208°C.
Capacity
See capacity chart.
35-1720 Kpa.
Temperature limit
208°C.
Capacity
See capacity chart.
MK7B steam trap with integral strainer
Pressure limit
35-1720 Kpa.
Temperature limit
260°C
Capacity
See capacity chart.
35-1720 Kpa.
Temperature limit
260°C
Capacity
See capacity chart.
MK7C steam trap with integral strainer
Condensate capacity
Varies according to insert.
Pressure limits
35-3100 kPa.
Temperature limits
To 343°C.
Varies according to insert.
Pressure limits
35-3100 kPa.
Temperature limits
To 343°C.
MK7C/1000 steam trap with integral strainer
Condensate capacity
Varies according to insert.
Pressure limits
3100-10340 kPa.
Temperature limits
To 566°C with J3 fitted.
Varies according to insert.
Pressure limits
3100-10340 kPa.
Temperature limits
To 566°C with J3 fitted.
MK10B steam trap with integral strainer
Condensate capacity
Varies according to insert.
Pressure limits
35-3100 kPa.
Temperature limits
To 343°C.
Varies according to insert.
Pressure limits
35-3100 kPa.
Temperature limits
To 343°C.
Disclaimer
CLAM Engineering provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. The data is intended as a guide ONLY. Individuals using this data must exercise their own judgement in evaluating product selection and determining product appropriateness for their particular purpose and systems requirements. CLAM Products makes no representations or warranties, either expressed or implied, including without limitation any warranties of merchantability or fitness for a particular purpose with respect to the information set forth herein or the product(s) to which the information refers. Accordingly, CLAM will not be responsible for damage (of any kind or nature, including accidental, direct or consequential damages) resulting from the use of, or reliance upon, this information. CLAM will take no responsibility for any harm or loss experienced as a result of improper handling, installation or operation of CLAM products. CLAM reserve the right to change product design and specifications without notice. 2011 CLAM Engineering by Turn Out Engineering Pty Ltd.
Turn Out Engineering Pty Ltd - 52 Mornington Road Tyabb Vic 3913 | Phone : 61 (03) 5977 3874 | Fax : +61 (03) 5977 3499 | Email : sales@clam.com.au